PS Steel Socket Female Union
Basic Info
Model No.: PS3/8B-28L
Product Description
PS Steel Socket Female Union
-
Material standard
General structural carbon steel pipe (JIS G3444) or equivalent material is used. -
Screw standard
This is an internal thread type pipe fitting (conforming to JIS B0203) that requires a parallel female thread [symbol: PS (Rp)] for taper male thread or a taper female thread [symbol: PT (Rc)]. Suitable for joining pipe nipples, other pipe material parts, fluid equipment, etc. with pipe male thread (PT) for pipes whose main purpose is tightness. -
About inspection of screw
All thread inspections are performed using a taper thread gauge specified in the standard number (JIS B0253) defined by the Japanese Industrial Standards (JIS standard). In addition, our inspection gauge manufacturer uses OSG (OSG). -
Join method
When tightening, after tightening by hand, it is necessary to tighten with torque using a tool such as a pipe wrench. However, in order to tightly bond, even if it is tightened tightly, there is a slight space between the top and bottom of the mountain in practical use, and perfect airtightness cannot be secured. Therefore, it is necessary to take measures such as wrapping seal tape (tape-like gap filling material) around the screw before assembly or applying the same liquid sealant. (It is necessary to select the type of sealing material suitable for the piping application.) Also, when assembling in a place where attention is paid to leakage, seal tape (about 2 to 3 turns) is wrapped around the external thread. Apply sealant from the top, and apply sealant on the female thread side to secure tightness. -
Inspection pressure
Leakage(pneumatic) 0.5Mpa(5.1kgf/cm2) Pressure resistance(water pressure) 2.5Mpa(25.5kgf/cm2)
-
Type, symbol, chemical composition
Type Symbol Chemical composition(%) C Si Mn P S Ni Cr Mo Carbon steel pipe for general structure STK 0.25 or less - - 0.040 or less 0.040 or less - - -
Specification
Material standard
General structural carbon steel pipe (JIS G3444) or equivalent material is used.Screw standard
This is an internal thread type pipe fitting (conforming to JIS B0203) that requires a parallel female thread [symbol: PS (Rp)] for taper male thread or a taper female thread [symbol: PT (Rc)]. Suitable for joining pipe nipples, other pipe material parts, fluid equipment, etc. with pipe male thread (PT) for pipes whose main purpose is tightness.About inspection of screw
All thread inspections are performed using a taper thread gauge specified in the standard number (JIS B0253) defined by the Japanese Industrial Standards (JIS standard). In addition, our inspection gauge manufacturer uses OSG (OSG).Join method
When tightening, after tightening by hand, it is necessary to tighten with torque using a tool such as a pipe wrench. However, in order to tightly bond, even if it is tightened tightly, there is a slight space between the top and bottom of the mountain in practical use, and perfect airtightness cannot be secured. Therefore, it is necessary to take measures such as wrapping seal tape (tape-like gap filling material) around the screw before assembly or applying the same liquid sealant. (It is necessary to select the type of sealing material suitable for the piping application.) Also, when assembling in a place where attention is paid to leakage, seal tape (about 2 to 3 turns) is wrapped around the external thread. Apply sealant from the top, and apply sealant on the female thread side to secure tightness.Inspection pressure
Leakage(pneumatic) | 0.5Mpa(5.1kgf/cm2) |
---|---|
Pressure resistance(water pressure) | 2.5Mpa(25.5kgf/cm2) |
Type, symbol, chemical composition
Type | Symbol | Chemical composition(%) | |||||||
---|---|---|---|---|---|---|---|---|---|
C | Si | Mn | P | S | Ni | Cr | Mo | ||
Carbon steel pipe for general structure | STK | 0.25 or less | - | - | 0.040 or less | 0.040 or less | - | - | - |
Specification
Product Categories : Standard Socket > Steel Standard Socket
Hot Products
excavator long boom for all kinds excavatorsroot rake excavator attachment rake for hyundai xuwa xugonghydraulic breaker chisel for all brand excavatorsexcavator ripper earth moving parts frost for heavy duty excavatorsHigh strength Hydraulic Thumb fit for 20ton excavator15-20tons excavator mounted hydraulic earth hole auger drilling machineExcavator Pile driver machine SK360 Hydraulic Vibratory Pile hammerChina Manufacturer ZX55 ZX60 Excavator Mounted Hydraulic Rock Breaker Hammer with CE certificationDoosan Daewoo DH220 DH225 Excavator Hydraulic BreakerKobelco SK210 Excavator Used Car Dismantled Machine Hydraulic Crusher for SaleCE Certified PC40 Mini Excavator Hydraulic Rotating Log GrappleExcavator Mounted Underwater Bulk Cargo Hydraulic Clamshell Grab BucketPC300 Hydraulic Excavator Quick Coupler Pin GrabberDLK Brand clamshell grab bucket excavator for sale500kg hydraulic plate compactor for 15ton VOLVO excavatorExcavator Mounted hydraulic tools Korea Quality Light Duty Hydraulic Breaker