hydraulic steel shear / pulverizer for excavators
Product Description
The scrap shear( SH EAGLEⅡ)can be used in all industrial demolition sites for the cutting and recovery of ferrous materials such as iron sections, pipes, tanks, railway carriages etc. that later may be easily recycled. |
|
1.New Pearcing Tip:Bolted blades on piecrcing tip for fast Replacement.Eliminates time consuming rebuilding of the tip.
2.Double Guide:Twin guide for the movable jaw,ensures perfect alignment.
3.Frontal Blade:The front blade ensure accurate shearing with the tip and can be turned.
4.New Jaw design:New fixed jaw design increase cutting capacity,material is eased to fall away easily.
5.All New Blades:All the blades have been redesigned in a rhomboid shape to reduce stress on the jaw.Each blade can be turned effectively 3 times.The new blade are threaded for easier removal and installation.
6. Central Pin Adjustment Kit: Mantovanibenne have a unique central pivot pin layout. This allows for regular adjustment of the pin to ensure perfect shearing. While fully protected the pin can be removed for maintenance of all related parts.
7. Special Speed Valve: Reduced cycle times Regenerating power when required.Protection for the shear eliminating pressure peaks.
8. Rotating Group with Anticavitation Valve:360° continuous rotation. Always the best positioning of the shear.
9. All New Cylinders: Increased cylinder size for 20% more power. Forged cylinder rod for a better functionality and security . Reversed cylinder installation for full rod protection.
10. A unique total shear greasing system, ensuring all moving parts are regularly greased.
Quality is guaranteed | Faster | Safer |
1.12 month after-sales warranty for hydraulic motor and cylinder. 2. We have the profession team (Pre-sale service, Technical team, After-sales service.) and will solve all your problems. 3.13 years working experience in this filed. | Nearby Ningbo and we promise the delivery time is within 7 days |
|
Tip 1: Makesure of the weight of excavator, the oil flow and the working pressure of your excavator.
SH100R | SH130R | SH180R | SH310R | SH410R | SH550R | SH700R | SH900R | ||
Excavator weight | T | 10-12 | 13-17 | 18-27 | 28-39 | 39-50 | 51-65 | 70-90 | 91-110 |
Excavator weight | T | 7-10 | 8-12 | 14-18 | 20-28 | 28-39 | 39-45 | 45-60 | 60-80 |
Tool weight without coupler | kg | 980 | 1100 | 1900 | 2950 | 4400 | 5500 | 7400 | 9400 |
Cylinder force | T | 76 | 109 | 145 | 200 | 247 | 299 | 397 | |
Hydraulic working pressure | bar | 250-300 | 320-350 | 320-350 | 320-350 | 320-350 | 320-350 | 320-350 | |
Oil flow | l/min | 90-110 | 150-200 | 200-250 | 250-300 | 275-375 | 500-600 | 600-700 | |
Rotation type | / | 360° | 360° | 360° | 360° | 360° | 360° | 360° | 360° |
Hydraulic motor max oil pressure | bar | 190-200 | 90-100 | 90-100 | 100-115 | 100-115 | 100-115 | 140-150 | 170-190 |
Hydraulic motor oil flow | l/min | 10-15 | 30-40 | 30-40 | 30-40 | 30-40 | 30-40 | 50-60 | 55-65 |
Time of closing at max oil flow | s | 2,37 | 1,87 | 2,51 | 3,97 | 4,27 | 2,80 | 3,19 | |
Time of opening at max oil flow | s | 2,97 | 2,56 | 4,27 | 4,96 | 5,34 | 4,82 | 6,33 | |
N of cycles per minute at max oil flow | cycles/min | 11,2 | 13,5 | 8,8 | 6,7 | 6,2 | 7,9 | 6,3 | |
N of revs per minute at max oil flow | revs/min | 16,6 | 12 | 11,2 | 6,7 | 7,4 | 5,7 | 9,7 | 8,5 |
Hyd. ports size cylinder | / | 3/4"GAS | 3/4"SAE6000p.s.i. | 1"SAE 6000 p.s.i. | 1"SAE 6000 p.s.i. | 1"1/4SAE 6000 p.s.i. | 1"1/4 SAE 6000 p.s.i. | 1"1/2 SAE 6000 p.s.i. | 1"1/2 SAE 6000 p.s.i. |
Hyd. ports size rotation | / | 1/2"GAS | 1/2"GAS | 1/2"GAS | 1/2"GAS | 1/2"GAS | 1/2"GAS | 1/2"GAS | 1/2"GAS |
Hyd. ports size drain line | / | N.N. | N.N. | 1/4"GAS | 1/4"GAS | 1/4"GAS | 1/4"GAS | 1/4"GAS | 1/4"GAS |
Speed value | / | YES | YES | YES | YES | YES | YES | YES | YES |
Interchangeable wear parts | / | YES | YES | YES | YES | YES | YES | YES | YES |
Automatic grease system | / | NO | NO | NO | NO | NO | NO | YES | YES |
Tip 2: Make sure of the diameter and the cutting table of the object
SH100R | SH130R | SH180R | SH310R | SH410R | SH550R | SH700R | SH900R | |||||||||
| mm | mm | mm | mm | mm | mm | mm | mm | |||||||||
Jaw opening A | 375 | 445 | 565 | 670 | 760 | 830 | 965 | |||||||||
Jaw depth B | 395 | 525 | 630 | 720 | 780 | 840 | 930 | |||||||||
Length C | 2000 | 2100 | 2700 | 3300 | 3700 | 3950 | 4300 | 4600 | ||||||||
Force at upper tips F1 | 55 | 75 | 110 | 151 | 185 | 215 | 290 | |||||||||
Cutting force F2 (main blade centre) | 138 | 198 | 286 | 413 | 478 | 552 | 707 | |||||||||
Force at pin F3 | 472 | 770 | 1031 | 1372 | 1810 | 2081 | 2796 | |||||||||
Material used to test St52 | Rod | Tube | IPE | HEA | HEB | Plate | L profile | Rail vignola | ||||||||
mm | mm | mm | mm | mm | mm | mm | mm | |||||||||
SH100R SH130R | 55 | n.d | 200 | 120 | n.d | 10 | 120*10 | n.d | ||||||||
SH180R | 60 | n.d | 270 | 140 | n.d | 12 | 120*12 | n.d | ||||||||
SH310R | 70 | n.d | 300 | 200 | 450 | 18 | n.d | 36 | ||||||||
SH410R | 90 | n.d | 450 | 320 | n.d | 20 | 200*24 | n.d | ||||||||
SH550R | 100 | n.d | 500 | 360 | n.d | 22 | 220*24 | n.d | ||||||||
SH700R | 120 | n.d | 600 | 400 | n.d | 25 | 240*24 | n.d | ||||||||
SH900R | 150 | n.d | 900 | 600 | n.d | 35 | n.d | n.d | ||||||||
Product Categories : Hydraulic Shear/Crusher > Hydraulic Shear/Crusher
